Garden Tool Storage Racks for Rakes, Shovels and Long Handles
In this guide
Long-handled garden tools belong on the wall, head up, on a stud-mounted rack or rail, so nothing leans, falls or blocks the car. Pick by how many tools you have and whether you can drill: a 36-inch wall rack holds four to eight tools, a rail system grows as your collection does, and a freestanding corner tower holds the most handles with no drilling at all. Put a shallow shelf above the rack for gloves, pruners, seed and fertilizer. This is a spec-based guide built from manufacturers’ published specs and listings checked on 2026-10-28, not from installs of our own. Disclosure: As an Amazon Associate I earn from qualifying purchases. FOFARY, featured below, pays a bonus commission through Amazon Creator Connections. See /disclosure/.
The three formats
| Format | Best for | Typical capacity (published examples) | Install | Trade-off |
|---|---|---|---|---|
| Fixed wall rack | 4 to 8 long-handled tools in one spot | StoreYourBoard BLAT: 4 slots, 250 lb total | Lag screws into 16 in studs | Fixed slot spacing |
| Rail system | Growing collections; mixing tools, hoses and cords | Rail plus individually rated hooks | Rail screwed into studs | Hooks bought separately |
| Corner tower | No drilling, lots of handles | Rubbermaid tower: up to 30 tools; some towers claim 40 | Freestanding | Uses floor space; tools lean |
Fixed wall racks
A fixed rack is a steel bar with slots or hooks that bolts to the wall. You drop a tool handle-first through a slot so the head rests on top.
The StoreYourBoard BLAT rack is a good reference point because the maker publishes its specs. Per the StoreYourBoard product page, it is 36 x 9.5 x 2.5 inches, powder-coated steel, with four slots each 9.5 x 2 inches and 7.75-inch slot spacing. It is rated 250 lb total, ships with three lag screws, and is designed for studs 16 inches apart. The page lists concrete as a surface but says masonry anchors are not included. It names shovels, rakes, brooms and power tools.

Check the current price of the StoreYourBoard 36-inch tool organizer on Amazon ($49.99). StoreYourBoard also sells longer modular versions with sliding attachments; its pages list 300 lb for a 32-inch two-pack and 600 lb for a 64-inch four-pack.
Price as of November 18, 2026, 4:08 PM ET. Prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
How many tools per slot? Four slots at 2 inches wide will hold one shovel each, or two slim handles each. Plan on four to eight long tools per 36-inch rack.
Who it suits: a fixed set of tools and a wall with studs at 16 inches. What to watch: the slots are a set width, so a fat-handled tool or a wheelbarrow-width rake may not fit as well as a hook.
Rail systems
Rail systems (Rubbermaid FastTrack, Gladiator GearTrack and similar) screw a long steel or resin rail to the studs, then take hooks, baskets and holders that slide on. For garden tools you add multi-tool holders or individual hooks.
The appeal is flexibility: rakes, a hose reel, extension cords and a leaf blower all share one rail, and you can move things as the season changes. The catch is that the published ratings are split. Rail kits are listed with a high total capacity, but each hook has its own, much smaller rating, and the whole system is limited by how many studs the rail is fastened to. Read the rating printed on each hook and spread heavy items along the rail. Our comparison of Rubbermaid FastTrack vs Gladiator GearTrack goes through the two systems in detail, and slatwall vs pegboard vs track explains when a full-wall system is worth it.
Corner towers
A corner tower is a freestanding plastic or steel frame with a grid of openings at the top and a base tray; you stand tools in it handle-down or head-down. It needs no drilling, which suits renters and block walls.
- Rubbermaid’s corner tool tower is listed by Walmart as holding up to 30 long-handled tools, with dimensions of about 19.4 x 32 x 20 inches; listings disagree on the exact figures.
- Tractor Supply lists a PeerBasics corner rack at 40 long-handle tools, 21 x 21 x 21.25 inches.
Capacity claims on towers assume a mix of slim and thick handles; reviewers of some models have found the headline number optimistic. A tower is also easier to tip if all the heavy tools end up on one side; keep heavy shovels low and centered and push it into the corner. If drilling is not an option for you, see renter-friendly garage storage.
A shelf above the rack for small tools and supplies
Long handles take care of themselves on a rack. Small hand tools, gloves, twine, seed, plant food and spray bottles need a shallow shelf, ideally right above the rack so the whole garden kit is in one place.

Check the current price of the FOFARY 24 x 12 in wall shelf 2-pack on Amazon.
$39.99Price as of November 18, 2026, 4:08 PM ET. Prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Chemicals. Keep fertilizer, weed killer and pesticide in their original containers, closed, on a shelf children and pets cannot reach, and follow each label’s storage directions. Do not store them on the floor where water from the car can reach the bags.
Mounting a rack properly
- Find studs with a stud finder and confirm with a small nail. Most walls are framed at 16 or 24 inches on center (City of Blaine framing handout).
- Pick the height. Hang the rack so the longest tool’s handle end clears the floor by a few inches. For rakes and shovels around 4.5 to 5 feet long, that usually puts the rack at about 5 feet.
- If studs do not line up with the rack’s holes (for example, 24-inch framing and a rack designed for 16), screw a 1x4 or 2x4 backer horizontally across at least two studs, then lag the rack into the backer.
- Block or concrete walls: use masonry anchors rated for the wall. Hollow block is much weaker than solid concrete; see mounting on concrete block walls.
- Level it, drive the lag screws snug, and load it.
How much wall you need
Count your long-handled tools first, then size the wall (our arithmetic from the published BLAT dimensions):
| Tool count | Fixed racks (36 in, 4 slots) | Wall length | Notes |
|---|---|---|---|
| Up to 6 | One rack | About 3 ft | Two slim handles can share a slot |
| 7 to 12 | Two racks side by side | About 6 ft | Mount each into its own studs |
| 13 or more | Rail system or a corner tower | 6 ft and up, or a corner | Add hooks as the collection grows |
Leave about a foot of clear width beside a rack for a wheelbarrow or spreader standing on the floor, and keep the whole zone out of the car-door swing. Rake heads and fork tines stick out from the wall by several inches, so do not put the rack where you squeeze past the car.
Layout ideas
- Near the door to the yard. Garden tools are carried out and back; put them by the side or overhead door, away from the car’s doors.
- Long handles below, small tools above, on one wall, so the whole kit is visible.
- Wheelbarrow and spreader on the floor beneath, or hung by the wheel on a heavy hook rated for it.
- Hose on its own hook, away from sharp tool heads.
- Plan the zone with our garage storage ideas by zone guide.
Care that makes storage work
- Clean and dry heads before hanging; wet soil on steel encourages rust.
- Sharp edges in, or covered, especially at head height or where children walk.
- Wipe wooden handles occasionally; a dry garage is better than a damp shed for them.
- Check the rack once a season for loose lag screws.
Bottom line
Hang long-handled tools head up on a stud-mounted rack or rail; use a corner tower if you cannot drill. Size the rack by tool count (four to eight per 36 inches of fixed rack), mount into studs or a backer, and add a shallow shelf above it for hand tools and supplies, rated conservatively.
Frequently asked questions
What is the best way to store rakes and shovels in a garage?
Hang them on the wall, head up, from a stud-mounted rack or rail, so they are off the floor, cannot fall over and each one comes off without moving the others. A freestanding corner tower is the no-drilling alternative; it takes floor space but holds a lot of handles in a small footprint.
How much weight does a garden tool rack need to hold?
Less than you might think for the tools, but the rating still matters because of leverage and people pulling tools off. A typical rake or shovel weighs a few pounds; the StoreYourBoard BLAT rack is rated 250 lb total and retailers list Rubbermaid FastTrack rail kits at a much higher total, with each hook rated separately. The real limit is the wall: mount into studs or with rated masonry anchors.
Should garden tools hang head up or head down?
Most wall racks hold long-handled tools head up, with the handle hanging below, so the heavy end sits on the rack and the tool cannot slide out. Corner towers hold them head up too, standing on the handle end. Either way, clean and dry metal heads before storing to slow rust.
Can I mount a tool rack without studs?
Not for a loaded rack on drywall. StoreYourBoard designs its BLAT rack for 16 in stud spacing and includes lag screws for wood studs; it lists concrete as a surface but does not include masonry anchors. If your studs do not line up, fasten a 1x4 or 2x4 backer across the studs and mount the rack to it.
Where should fertilizer and small hand tools go?
On a shelf above or beside the long-handle rack, not on the floor. Keep fertilizers, weed killers and pesticides in their original containers, closed, out of reach of children and pets, and follow the storage directions on each label.
Keep planning
- Plastic vs Steel Garage Shelving
Plastic vs steel garage shelving compared on published load ratings, rust, moisture, depth and assembly, with spec-based steel picks from REIBII and Lionhon.
Updated Nov 2026 - Best Garage Shelving: Heavy-Duty Picks on Published Specs
Best garage shelving, compared on published specs: per-shelf load ratings, 18 vs 24 inch depth for totes, wire vs MDF decks, and which unit suits which garage.
Updated Oct 2026 - Corner Garage Shelving: L-Shaped Units and Corner Wall Shelves
Corner garage shelving: how to set two units in an L, how big the blind corner is, corner wall shelves, anchoring at the corner and which unit depths to pair.
Updated Oct 2026