REIBII vs Lionhon Garage Shelving: Published Specs Compared

Two black steel garage shelving units side by side, one with wire mesh decks and one with solid steel decks, holding totes, toolboxes and paint cans
Photo: , via Wikimedia Commons
In this guide
  1. The units compared
  2. Per-shelf ratings: what the numbers mean
  3. Width and depth for totes
  4. Construction differences
  5. Tipping and anchoring
  6. Listing inconsistencies to know about
  7. Other REIBII sizes and multi-packs
  8. Which to buy
  9. Bottom line

Short answer: for a tote wall, pick the width first. Lionhon’s 59-inch 4-tier unit and REIBII’s 68.3-inch 4-tier rack both hold two 27-gallon totes per shelf; REIBII’s 48.2-inch 5-tier holds one tote per shelf long side forward but gives you a fifth tier. On published per-shelf numbers all three are far beyond a shelf of totes, so let width, tier count, deck type and anchoring hardware decide. This comparison is spec-based: every figure comes from the brands’ Amazon listings, checked 2026-10-28, not from tests of our own. Disclosure: As an Amazon Associate I earn from qualifying purchases. Both REIBII and Lionhon pay a bonus commission through Amazon Creator Connections, so neither is favored here; see /disclosure/.

The units compared

Both brands sell many sizes. These are the garage units with the clearest published specs.

Unit (Amazon listing, checked 2026-10-28)Size W x D x HTiersPer shelf (published)Total (published)Deck
Lionhon Heavy Duty 4-tier ($125.99)59 x 23 x 67 in4Up to 1,125 lb, evenly distributed4,500 lbOne-piece steel panel, 8 ribs
Lionhon 4-tier 36-inch ($80.99)36 x 16 x 71 in4Not stated3,000 lb, evenly distributedThree panels, 6 ribs per tier
REIBII 5088 lb wire rack ($169.99)68.3 x 23.4 x 72 in41,272 lb5,088 lb4.15 mm steel wire
REIBII 48.2-inch 5-tier ($175.98)48.2 x 24.5 x 72 in5602 lb3,010 lbSolid steel grid, 7 ribs
REIBII 78-inch 5-tier ($189.99)55 x 26 x 78 in5600 lb3,000 lbSteel
REIBII 40-inch wire mesh ($99.96)40 x 19.5 x 59.5 in4560 lb2,240 lb4.4 mm wire grid
REIBII 72-inch, 32 wide32 x 17.1 x 72 in5410 lb2,050 lbSteel

Price as of November 18, 2026, 4:08 PM ET. Prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Check the current price on Amazon for each. Specs are listing claims; the label and manual on the unit you receive govern.

Two things stand out. First, the brands occupy different shapes: Lionhon’s main unit is short and wide (67 inches tall, four tiers), while REIBII’s range runs taller (72 to 78 inches) with five tiers on several units. Second, every per-shelf number above is the total divided by the shelf count, so neither brand is hiding a lower per-shelf rating behind a big total, with one exception: the Lionhon 36-inch unit publishes only a total.

Per-shelf ratings: what the numbers mean

All shelving ratings assume the load is spread evenly across the whole shelf, and both brands say so in their listings. Edsal’s manual for its comparable UR-series boltless units puts the same condition in writing: 800 lb per shelf, not to exceed 4,000 lb for the unit, evenly distributed across the entire shelf surface (Edsal assembly instructions, PDF). That gives a useful benchmark:

  • Lionhon 59-inch at 1,125 lb per shelf and REIBII 68.3-inch at 1,272 lb per shelf claim more than the Edsal figure.
  • REIBII 48.2-inch at 602 lb and REIBII 78-inch at 600 lb sit below it.

Neither brand names a test standard. REIBII’s 48.2-inch listing says each shelf holds 602 lb “tested by third-party labs” without naming the lab. Lionhon does not describe testing. There is an industry standard for industrial boltless shelving (ANSI MH28.2, through MHI’s Storage Manufacturers Association), but neither brand claims to meet it. Treat the higher claims as the makers’ figures, and plan dense loads (bagged concrete, engine parts, tile) conservatively. Our guide to reading heavy-duty load ratings explains why the per-shelf figure is the one that limits you.

For context, a shelf of two full 27-gallon totes rarely passes 150 lb (HDX rates its 27-gallon tote at 75 lb). Any unit in the table carries that easily. The ratings only start to matter for dense loads.

Width and depth for totes

The common 27-gallon tote measures 28 1/2 x 19 5/8 x 15 1/2 inches at the rim (Sterilite).

UnitDepth vs 19.6-in toteTotes per shelf, long side forwardNotes
Lionhon 59 in23 in: fits, about 3.4 in spare2 (needs ~57 in)Tightest two-tote fit, 2 in to spare across
REIBII 68.3 in23.4 in: fits2, with ~11 in left for a small binMost room per shelf
REIBII 48.2 in24.5 in: fits1 (or 2 sideways with overhang)Fifth tier makes up some capacity
REIBII 55 in (78 H)26 in: fits1 long side forward, or 2 sideways with ~2.5 in overhangListing claims “up to 10” totes per shelf, which cannot be 27-gallon totes on a 55 x 26 shelf
REIBII 40 in19.5 in: rim flush or slightly over1Better for 18-gallon totes
Lionhon 36 in16 in: overhangs1 sideways onlyPaint, tools, small bins

That REIBII “up to 10 per shelf” line is worth flagging: a 55 x 26-inch shelf physically holds two 27-gallon totes side by side turned sideways (with about 2.5 inches of rim overhang), not ten. Read listing copy for numbers you can check with a tape measure. The full fit chart is in shelving depth for 27-gallon totes.

Construction differences

Decks. Lionhon’s 59-inch unit uses a one-piece steel panel per tier with eight ribs underneath, a solid, flat surface for small parts and cans. REIBII splits by model: wire mesh on the 5,088 lb and 40-inch units (dust and spills fall through, and the listing argues wire avoids trapped moisture), a solid steel grid on the 48.2-inch unit. In a damp garage, wire decks are the safer choice; in a dry garage, solid panels are easier for small items. MDF and laminated decks (REIBII sells some) are best kept to dry spaces; see plastic vs steel garage shelving for the moisture trade-offs.

Uprights. REIBII’s 5,088 lb rack lists one-piece uprights and integrated diagonal braces. Lionhon’s 36-inch unit joins upper and lower upright sections with metal joining pieces and screws. Many boltless units, including Edsal’s, use a post connector between two post halves; one-piece uprights remove that joint, but neither brand publishes steel gauge, so we cannot compare frame stiffness directly.

Assembly. Both are boltless at the beam-to-upright joint and include a rubber mallet and gloves on their main garage units. Lionhon’s 59-inch unit bolts on its side braces; REIBII’s 5,088 lb rack has a “tighten screws” step. Lionhon’s own spec field describes nuts and bolts throughout, which does not quite match its bullets; expect a mix. The rivet-seating steps that apply to both are in our boltless shelving assembly guide.

Locking pins. Lionhon lists anti-drop safety pins at the beam connections; REIBII’s 5,088 lb rack lists 16 safety locking pins. Pins stop a beam lifting out of its slot if a shelf is bumped from below.

Splitting. Several REIBII units split into two shorter units (the 48.2-inch into two racks, the 72-inch into 2 and 3 tiers). Lionhon does not advertise this on its 59-inch unit.

Tipping and anchoring

A tall unit loaded on its upper shelves can tip if someone pulls on it. The CPSC’s Anchor It campaign recommends anchoring furniture with shelves to the wall, and Edsal’s manual says to always secure its units to a wall with suitable fasteners.

  • REIBII 5,088 lb rack: “2 anti-tip kits” listed; contents not described.
  • REIBII 40-inch wire and 72-inch, 32-wide units: anti-tip kits or devices listed.
  • REIBII 48.2-inch and 78-inch units: no anchor kit mentioned.
  • Lionhon 59-inch and 36-inch: no anchor kit mentioned; foot pads and safety pins only.

Height relative to depth is a rough guide to tipping tendency: Lionhon’s 59-inch unit is 67 inches tall on a 23-inch base (about 2.9 to 1), REIBII’s 48.2-inch is 72 on 24.5 (2.9), and Lionhon’s 36-inch unit is 71 on 16 (4.4), the tippiest shape here. Whichever you buy, anchor it to a stud; anchoring garage shelving to the wall covers strap and bracket hardware.

Listing inconsistencies to know about

Neither brand publishes a separate spec sheet we could find, so the listing is all you have. Points that did not add up on 2026-10-28:

  • Lionhon 59-inch: spec table says “Number of shelves: 1” against four tiers in the title, and lists the finish as both lacquered and powder coated.
  • Lionhon 36-inch: spec table says five shelves; title says 4-tier. No per-shelf rating.
  • REIBII 40-inch (B0CJ8VZL3F): bullet says 2,200 lb total; title says 2,240 lb. Plan on the lower.
  • REIBII 78-inch: “up to 10” totes per shelf; physically two 27-gallon totes.
  • REIBII 48.2-inch: “third-party lab” not named.

None of these is unusual for marketplace shelving, but they are why we tell you to plan on the lower figure and read the label when the box arrives.

Other REIBII sizes and multi-packs

REIBII also sells several units in multi-packs and odd shapes. None changes the picks below, but they fill gaps Lionhon does not (specs per each Amazon listing, checked 2026-11-04):

Unit (Amazon listing)Size W x D x H, eachTiersPer shelf (published)Total (published)Deck
REIBII 78-inch 5-tier, 2-pack ($358.96)55.2 x 26 x 78.2 in5600 lb3,000 lb per unitSteel
REIBII 36-inch wire mesh, 2-pack ($137.99)36 x 16 x 72 in5Not stated3,200 lb per unit (title)Wire mesh
REIBII 35.5-inch, 3-pack ($119.96)35.5 x 11.8 x 72 in5“At least” 400 lb2,000 lb per unitLaminated boards
REIBII 78.4-inch corner unit ($299.98)78.4 x 11.8 x 59 in4Not stated1,500 lbWire

Price as of November 18, 2026, 4:08 PM ET. Prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

  • The 78-inch 2-pack lists the same size and ratings as the single 78-inch unit above, sold as two, and its listing includes anti-tip kits where the single unit’s does not mention one. Same tote fit: one long side forward, or two sideways with about 2.5 inches of overhang.
  • The 36-inch wire-mesh 2-pack gives only a total. Dividing 3,200 lb by five shelves gives 640 lb, but that is arithmetic, not a rating; ask the seller before loading one shelf heavily.
  • The two 11.8-inch-deep units are for a narrow wall beside a car: paint cans, shoe-box bins, tools. Neither takes an 18- or 27-gallon tote. The laminated boards on the 3-pack suit a dry garage better than a damp one. The corner unit sets up straight, in an L or in a U, but does not split into separate units.

Which to buy

Featured (disclosed relationship): both brands

Both REIBII and Lionhon pay us a bonus commission on the units in this guide, so the picks below are made on published specs alone. Neither is the right choice for a narrow wall beside a car (look at 12 to 16-inch-deep units instead), for anyone who needs a published test standard, or for a buyer who wants a printed spec sheet before purchase.

  • Lionhon Heavy Duty Garage Shelving, 4-Tier Metal Shelving Unit, 4500 lb | 67"H×59"W×23"D; 4500 lb capacity; for garage, basement, workshop and utility room storage
    Two totes per shelf, solid flat decks, shorter garage wall: the Lionhon 59 x 23 x 67-inch 4-tier ($125.99). Not for: five tiers, or a unit that ships with anchor hardware.

    Price as of November 18, 2026, 4:08 PM ET. Prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

  • REIBII 5088LBS Garage Shelving, 4-Tier Wire Rack Storage Shelves, 68.3"W | 23.4"D x 72"H,Heavy Duty Shelves,One-Piece Uprights,Diagonal Braces,Adjustable Rack for Garage,Workshop,Basement
    Two totes per shelf plus space for a small bin, and anti-tip kits in the box: the REIBII 5088 lb 68.3-inch wire rack ($169.99). Not for: walls under 70 inches wide; small items without a shelf liner.

    Price as of November 18, 2026, 4:08 PM ET. Prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

  • REIBII 48.2" W Storage Shelves for Garage, Adjustable Garage Shelving | 48.2" W x 24.5" D x 72" H, 5 Tier Metal Shelving, 3010LBS Load Capacity, Rust-Resistant Coating, 10-Minute Assembly
    Five tiers, one tote per shelf, splits into two units later: the REIBII 48.2 x 24.5 x 72-inch 5-tier ($175.98). Not for: two totes per shelf without overhang.

    Price as of November 18, 2026, 4:08 PM ET. Prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

  • REIBII 78"H Garage Shelving,Heavy Duty Storage Shelves For Basement | 3000LBS Shelving,5 Tier Adjustable Metal Shelves for Commercial,Business,Warehouse,Shop,Factory,Pantry 55" W x 26" D x 78" H
    Tall wall, bulky items, a workbench option: the REIBII 55 x 26 x 78-inch 5-tier ($189.99). Not for: anyone who wants an anchor kit included.

    Price as of November 18, 2026, 4:08 PM ET. Prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

  • Lionhon 4-Tier Metal Shelving, Heavy Duty Garage Shelving, 3000 lb | 36 x 16 x 71 in; 3000 lb total capacity; adjustable metal storage shelves for garage and basement
    Paint and tools on a shallow wall: the Lionhon 36 x 16 x 71-inch unit ($80.99), anchored. Not for: heavy single-shelf loads until the seller confirms a per-shelf rating.

    Price as of November 18, 2026, 4:08 PM ET. Prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Non-campaign alternatives, including Seville Classics and SISESOL units, are in our best garage shelving roundup.

Bottom line

REIBII and Lionhon publish similar kinds of numbers with similar caveats. Lionhon’s wide 4-tier pairs a high per-shelf claim with solid one-piece decks and fits two totes cleanly; REIBII offers more sizes, more tiers, wire decks and, on some models, anti-tip kits in the box. Choose on width, tier count and deck, plan dense loads below the claimed ratings, and anchor whichever you buy.

Frequently asked questions

Is REIBII or Lionhon garage shelving stronger?

On published numbers the top units are close: REIBII's 68.3-inch 5,088 lb rack claims 1,272 lb per shelf and Lionhon's 59-inch 4-tier claims up to 1,125 lb per shelf evenly distributed, while REIBII's 48.2-inch 5-tier is listed at 602 lb. Neither brand names a test standard, so treat these as the makers' claims, not independent ratings. For most garages either is far above what a shelf of totes weighs.

Which is better for 27-gallon totes?

The wider units. A 27-gallon tote is about 28.5 x 19.6 inches at the rim, so two side by side with the long side forward need about 57 inches. Lionhon's 59-inch unit and REIBII's 68.3-inch rack both do that; REIBII's 48.2-inch unit takes one that way or two turned sideways with overhang. All three are 23 to 24.5 inches deep, enough for the tote's 19.6-inch depth.

Do REIBII or Lionhon shelves come with wall anchors?

Some REIBII listings say so: the 5,088 lb rack lists 2 anti-tip kits and 16 safety locking pins, and the 40-inch wire unit lists anti-tip kits and non-slip pads. The listings do not describe what the kits contain. The Lionhon listings mention anti-drop safety pins and foot pads but no wall anchor. Plan to anchor any tall unit to a stud with fasteners suited to your wall either way.

Are the total weight ratings on these listings real?

They are the makers' totals for weight spread evenly across every shelf, which is how all shelving is rated. The number that limits you is the per-shelf figure. REIBII's 3,010 lb unit is 602 lb per shelf and Lionhon's 4,500 lb unit is 1,125 lb per shelf. Where a listing gives no per-shelf figure, as on Lionhon's 36-inch 3,000 lb unit, ask the seller before loading one shelf heavily.

Which brand is easier to assemble?

Both use boltless beams that tap into slotted uprights with a rubber mallet, and both include a mallet and gloves on their main garage units. Lionhon's 59-inch unit adds bolted side braces, and REIBII's 5,088 lb rack includes a step to tighten screws. Our boltless shelving assembly guide covers the rivet-seating steps that apply to both.